| FIRST LEG ANGLE | 30.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.7500 INCHES NOMINAL |
| FIRST LEG END WIDTH | 2.5000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.3900 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.6000 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.2500 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.5000 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.1500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766, COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 OR STEEL COMP 304L |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 4.4500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.3730 INCHES MINIMUM AND 0.3820 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.0000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.8200 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.7500 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.2500 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.5000 INCHES NOMINAL |
| SECOND LEG LENGTH | 7.0000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171, FIN. 5.4.1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |