5365-01-362-1610 SHIM Index 5365-01-362-1612 SPACER,PLATE

National Stock Number:
5365-01-362-1611

Federal Supply Class:
5365

National Item Identification Number:
013621611

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
8898W32P00297424AMETEK INC


Techincal Specification:
APERTURE DIAMETER1.430 INCHES NOMINAL
BOLT HOLE QUANTITY3
HOLE DIAMETER0.125 INCHES NOMINAL
OUTSIDE DIAMETER1.940 INCHES NOMINAL
OVERALL THICKNESS0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM


Click here to Register for Free 30-day Trial