|
|
|
National Stock Number:
5365-01-367-1206
Federal Supply Class:
5365
National Item Identification Number:
013671206
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 82402099 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | 82402099 | 55070 | GOODRICH | | 82402099 | K4358 | SAFRAN ELECTRICAL & POWER UK LTD |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | BS S.526 CAGEC 8T061 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 6.115 INCHES MINIMUM AND 6.125 INCHES MAXIMUM | | OVERALL THICKNESS | 0.090 INCHES MINIMUM AND 0.093 INCHES MAXIMUM | | SMALLEST BOLT HOLE DIAMETER | 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | SMALLEST BOLT HOLE QUANTITY | 5 | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 914-032-083 CAGEC 8T061 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE | | APERTURE DIAMETER | 5.240 INCHES MINIMUM AND 5.250 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 5.687 INCHES NOMINAL | | BOLT HOLE QUANTITY | 10 | | LARGEST BOLT HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
|
|