|
|
|
National Stock Number:
5365-01-369-3532
Federal Supply Class:
5365
National Item Identification Number:
013693532
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2121807 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2121807 | 34635 | RIDGE MACHINE SHOP INC | | 2121807 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5365PL0894368 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.375 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.375 INCHES NOMINAL | | LARGEST BOLT HOLE DIAMETER | 0.656 INCHES NOMINAL | | LARGEST BOLT HOLE QUANTITY | 2 | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.812 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.937 INCHES NOMINAL | | OVERALL LENGTH | 4.250 INCHES NOMINAL | | OVERALL THICKNESS | 0.437 INCHES NOMINAL | | OVERALL WIDTH | 3.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1020 | | SMALLEST BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL | | SMALLEST BOLT HOLE QUANTITY | 4 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PHOSPHATE |
|
|