|
|
|
National Stock Number:
5365-01-373-1120
Federal Supply Class:
5365
National Item Identification Number:
013731120
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1670M66P02 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.126 INCHES NOMINAL | | OVERALL LENGTH | 0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM | | OVERALL THICKNESS | 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM | | OVERALL WIDTH | 0.900 INCHES MINIMUM AND 0.960 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4911 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.060 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.141 INCHES NOMINAL | | SPECIAL FEATURES | COUNTERSUNK MOUNTING HOLES 0.188 IN. DIA MIN TO 0.211 IN. DIA MAX,100 DEG | | STYLE DESIGNATOR | NON-CIRCULAR W/BEVELED CORNERS |
|
|