4710-01-451-7366 TUBE ASSEMBLY,METAL Index 5320-01-451-7368 PIN-RIVET

National Stock Number:
5365-01-451-7367

Federal Supply Class:
5365

National Item Identification Number:
014517367

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
3336286-198897LOCKHEED MARTIN CORP


Techincal Specification:
APERTURE DIAMETER1.750 INCHES NOMINAL
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.750 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.750 INCHES NOMINAL
HOLE DIAMETER0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.250 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.250 INCHES NOMINAL
OVERALL LENGTH2.250 INCHES NOMINAL
OVERALL THICKNESS0.375 INCHES NOMINAL
OVERALL WIDTH2.250 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-15035 MIL SPEC ALL MATERIAL RESPONSES
MATERIALPLASTIC PHENOLIC AND COTTON
STYLE DESIGNATORNON-CIRCULAR W/BOLT HOLES


Click here to Register for Free 30-day Trial