|
|
|
National Stock Number:
5365-01-453-3101
Federal Supply Class:
5365
National Item Identification Number:
014533101
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 752-6406822-40 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DF1706-412 FN 40 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.280 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.375 INCHES NOMINAL | | HOLE DIAMETER | 0.342 INCHES MINIMUM AND 0.352 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.310 INCHES NOMINAL | | OVERALL LENGTH | 3.000 INCHES NOMINAL | | OVERALL THICKNESS | 1.000 INCHES NOMINAL | | OVERALL WIDTH | 0.560 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/7 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5456 | | SPECIAL FEATURES | SPACER HAS GROOVE ALONG ONE SIDE OF OVERALL LENGTH; GROOVE HAS NOMINAL DEPTH OF 0.500 IN., HAS NOMINAL LENGTH OF 1.740 IN. AND EXTENDS ALONG ENTIRE WIDTH OF SPACER. | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|