|
|
|
National Stock Number:
5365-01-454-4120
Federal Supply Class:
5365
National Item Identification Number:
014544120
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 195-12-016-3-A | 1L160 | SUPERIOR WASHER & GASKET CORP. | | 3036AS550 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 3036AS550-1 | 072E5 | VERTEX MODERNIZATION AND SUSTAINMENT LLC | | 3036AS550-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| APERTURE DIAMETER | 0.099 INCHES MINIMUM AND 0.114 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 8 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL THICKNESS | 0.016 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | STYLE DESIGNATOR | CIRCULAR |
|
|