|
|
|
National Stock Number:
5365-01-456-7878
Federal Supply Class:
5365
National Item Identification Number:
014567878
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 117468 | 82686 | TRANSICOIL LLC |
|
Techincal Specification:
| APERTURE WIDTH | 0.468 INCHES NOMINAL | | APERTURE LENGTH | 0.737 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.062 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.094 INCHES NOMINAL | | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH | 0.094 INCHES NOMINAL | | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH | 0.086 INCHES NOMINAL | | OVERALL LENGTH | 0.925 INCHES NOMINAL | | OVERALL THICKNESS | 0.060 INCHES MINIMUM AND 0.064 INCHES MAXIMUM | | OVERALL WIDTH | 0.703 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES |
|
|