|
|
|
National Stock Number:
5365-01-457-2198
Federal Supply Class:
5365
National Item Identification Number:
014572198
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 12933775 | 19200 | US ARMY ARDEC RDECOM | | 12933775-1 | 19200 | US ARMY ARDEC RDECOM | | MIL-A-41600 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 1.313 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | HOLE DIAMETER | 0.940 INCHES MINIMUM AND 1.180 INCHES MAXIMUM | | OVERALL THICKNESS | 0.500 INCHES NOMINAL | | OVERALL WIDTH | 2.690 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-A-46100 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | 79 DEGREES 26 MINUTES IS THE POINT WHERE THE LENGTH MEETS THE WIDTH AND FORMS A PARRALLEL RECTANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 19207-12350824 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PAINT |
|
|