|
|
|
National Stock Number:
5365-01-459-0724
Federal Supply Class:
5365
National Item Identification Number:
014590724
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| LS5909G107-0712 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CONSTRUCTION | LAMINATED | | OVERALL LENGTH | 7.728 INCHES MINIMUM AND 7.782 INCHES MAXIMUM | | OVERALL THICKNESS | 0.122 INCHES MINIMUM AND 0.137 INCHES MAXIMUM | | OVERALL WIDTH | 1.406 INCHES MINIMUM AND 1.470 INCHES MAXIMUM | | LAMINATION QUANTITY | 20 AND 22 | | LAMINATION THICKNESS | 0.0025 INCHES MINIMUM AND 0.0035 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499,H39 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER,160-129L | | SPECIAL FEATURES | RMATL-COMMERCIAL 0.003 1100-H19 OR5052(H19 OR H39 TEMP)ALUM. FOIL BONDEDTO A BASE OF 2024 CLAD(T3,T4,T81,OR T861)WHEN 1100 ALLOY FOIL IS USED AND TOA BASE OF 5052(H32 OR H34)WHEN 5052 ALLOY FOIL IS USED,PER MIL-S-22499 | | STYLE DESIGNATOR | RECTANGULAR |
|
|