|
|
|
National Stock Number:
5365-01-531-5930
Federal Supply Class:
5365
National Item Identification Number:
015315930
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5PTC5507-2417C | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.310 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.875 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.204 INCHES NOMINAL | | LAMINATION QUANTITY | 25 | | LAMINATION THICKNESS | 0.010 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM ASSY, LAMINATED TUBE BLOCK CLAMPS | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM | | OVERALL LENGTH | 3.855 INCHES MINIMUM AND 3.895 INCHES MAXIMUM | | OVERALL THICKNESS | 0.313 INCHES NOMINAL | | OVERALL WIDTH | 0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM | | SPECIAL FEATURES | ITEM CONSISTS OF A BLOCK MADE FROM .063 THICK ALUMINUM SHEET 6013-T6 PER AMS 4216 OR 6013-T4 PER AMS 4347; 6061-T4 OR 6061-T6 PER QQ-A-250/11, WITH 0.030 DEEP CUT OUTS AND HAS EPOXY IMPREGNATED FIBERGLASS FABRIC PER 5PTTMGG23-TYA-FM181 AND 5PTPLG26 ADHESIVELY BONDED TO IT. ITEM MATES WITH 5PTC5504-N2417C | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|