|
|
|
National Stock Number:
5905-00-004-4971
Federal Supply Class:
5905
National Item Identification Number:
000044971
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1320-902 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 7903322 | 93322 | GE AVIATION SYSTEMS LLC DBA GE AVIATION |
|
Techincal Specification:
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | DOUBLE ENDED SHAFT | | BODY DIAMETER | 1.062 INCHES NOMINAL | | BODY LENGTH | 1.000 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW-CW | | OVERALL LENGTH | 1.414 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.06200 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL | | PILOT LENGTH | 0.06200 INCHES NOMINAL | | PILOT DIAMETER | 0.96830 INCHES MINIMUM AND 0.96880 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 355.5 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.1249 INCHES NOMINAL | | SHAFT LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | SHAFT END PLAY | 0.00400 INCHES | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT STYLE | ROUND, SLOTTED | | SPECIAL FEATURES | BOTH SHAFTS DIM. SAME | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | UNDERCUT DIAMETER | 0.975 INCHES NOMINAL | | UNDERCUT WIDTH | 0.05700 INCHES MINIMUM |
|
|