| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 80.0 SINGLE SECTION |
| BODY DIAMETER | 1.625 INCHES MAXIMUM |
| BODY LENGTH | 0.843 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 0.956 INCHES MINIMUM AND 1.109 INCHES MAXIMUM |
| OVERALL LENGTH | 2.469 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 80.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.5 |
| MOUNTING BUSHING LENGTH | 0.313 INCHES NOMINAL |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| NONTURN DEVICE RADIUS | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT LENGTH | 0.813 INCHES NOMINAL |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 01714-G395805 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |