|
|
|
National Stock Number:
5905-00-006-9440
Federal Supply Class:
5905
National Item Identification Number:
000069440
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 275-785-201K | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SHAFT STYLE | ROUND, SLOTTED | | SECTION QUANTITY | 1 | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION | | TERMINAL LENGTH | 0.500 INCHES NOMINAL | | BODY WIDTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE | | BODY HEIGHT | 0.312 INCHES NOMINAL | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 200.000 OHMS SINGLE SECTION | | SHAFT LENGTH | 0.062 INCHES NOMINAL | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | OVERALL WIDTH | 0.250 INCHES NOMINAL | | OVERALL HEIGHT | 0.312 INCHES NOMINAL | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | ACTUATOR TYPE | SINGLE SHAFT | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | RELIABILITY INDICATOR | NOT ESTABLISHED | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL | | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS | | TERMINAL TYPE AND QUANTITY | 3 PIN | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL | | BODY LENGTH | 1.250 INCHES NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 2 | | OVERALL LENGTH | 1.312 INCHES NOMINAL | | MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL |
|
|