|
|
|
National Stock Number:
5905-00-009-3110
Federal Supply Class:
5905
National Item Identification Number:
000093110
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| EPW20MEG | 77764 | RESISTANCE PRODUCTS CO | | EPW20MEG3PCT | 14298 | INSILCO CORP ACIC DIV | | EPW20MEG3PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | | G310074S5 | 24930 | L3HARRIS TECHNOLOGIES, INC | | RJU-95-20MEGP0RM2PCT | 24546 | DALE ELECTRONICS INC A VISHAY INTERTECHOLOGY INC CO P O BOX 74 NORFOLK NE68702-0074 | | RJU-95-20MEGPORM2PCT | 24546 | DALE ELECTRONICS INC A VISHAY INTERTECHOLOGY INC CO P O BOX 74 NORFOLK NE68702-0074 | | RPW-4-20M-1 | 24546 | DALE ELECTRONICS INC A VISHAY INTERTECHOLOGY INC CO P O BOX 74 NORFOLK NE68702-0074 |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 20.000 MEGOHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY DIAMETER | 1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM | | BODY LENGTH | 6.484 INCHES MINIMUM AND 6.516 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | FEAT | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 95.000 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SPECIAL FEATURES | RADAR AND IFF SYSTEMS | | STYLE DESIGNATOR | RADIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +25.0 TO 75.0 | | TERMINAL LENGTH | 0.765 INCHES MINIMUM AND 0.797 INCHES MAXIMUM | | TERMINAL TYPE | TAB, SOLDER LUG | | TEST DATA DOCUMENT | 24930-G310074 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|