|
|
|
National Stock Number:
5905-00-011-7103
Federal Supply Class:
5905
National Item Identification Number:
000117103
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| GA2M032S252UZ | 01121 | ROCKWELL AUTOMATION, INC. | | MIL-PRF-94/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILR94-3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RV106UX8B252A | 82679 | THE TECHNICAL MATERIAL CORPORATION | | RV6TAYSA252A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 2.5 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | BODY LENGTH | 0.469 INCHES MINIMUM AND 0.593 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | OVERALL DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | OVERALL LENGTH | 1.468 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | MOUNTING METHOD | LOCKING BUSHING AND SHAFT W/PANEL SEAL | | NONTURN DEVICE RADIUS | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 292.0 MINIMUM AND 298.0 MAXIMUM | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-94/3 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|