5905-00-015-7249 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-00-015-7261 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-015-7257

Federal Supply Class:
5905

National Item Identification Number:
000157257

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
11150193-618876U S ARMY AVIATION AND MISSILE COMMAND
26322-00426K0662LEONARDO MW LTD
26322-00426U6682LEONARDO UK LTD
37-802921-607397GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS
380-3586-00013499ROCKWELL COLLINS, INC.
55PR50073138BI TECHNOLOGIES CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION8280.0 MINIMUM AND 9000.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION500.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BODY HEIGHT0.343 INCHES NOMINAL
BODY LENGTH1.250 INCHES NOMINAL
BODY WIDTH0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM
CUBIC MEASURE0.124 CUBIC INCHES
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS1.005 INCHES MINIMUM AND 1.995 INCHES MAXIMUM
OVERALL HEIGHT0.844 INCHES NOMINAL
OVERALL LENGTH1.300 INCHES NOMINAL
OVERALL WIDTH0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM
MAXIMUM STARTING TORQUE8.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG9360.0 MINIMUM AND 10080.0 MAXIMUM
SECTION QUANTITY1
SHAFT DIAMETER0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SHAFT LENGTH0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS+0.0 TO 250.0 SINGLE SECTION
TERMINAL LENGTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
TERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us