3020-00-018-9401 GEAR AND TUBE ASSEM Index 5910-00-018-9404 CAPACITOR,FIXED,CERAMIC DIELECTR

National Stock Number:
5905-00-018-9402

Federal Supply Class:
5905

National Item Identification Number:
000189402

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
14C1-100703111BLISS E W CO GULF AND WESTERN MFG CO SUB OF GULF AND WESTERN INDUSTRIES
22400094117BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
6070510112GENERAL DYNAMICS MOTION CONTROL LLC
751-657912205BUNKER RAMO CORP AMPHENOL CONTROLS DIV
942904454SENSOR SYSTEMS, L.L.C.
CP09C15702297ACE ELECTRONICS ASSOCIATES INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION345.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY DIAMETER0.875 INCHES NOMINAL
BODY LENGTH0.625 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FRAGILITY FACTORMODERATELY DELICATE
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 SINGLE SECTION
LATERAL RUNOUT0.002 INCHES
OVERALL DIAMETER0.875 INCHES NOMINAL
OVERALL LENGTH1.125 INCHES NOMINAL
MAXIMUM RUNNING TORQUE0.75 INCH-OUNCES
MAXIMUM STARTING TORQUE0.75 INCH-OUNCES
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER0.8750 INCHES NOMINAL
MOUNTING METHODCLAMP RING
PILOT DIAMETER RUNOUT0.001 INCHES
PILOT DIAMETER0.7500 INCHES MAXIMUM
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS1.25 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT END PLAY0.004 INCHES
SHAFT BEARING TYPESLEEVE
SHAFT DIAMETER0.1249 INCHES MAXIMUM
SHAFT LENGTH0.500 INCHES NOMINAL
SHAFT RADIAL PLAY0.002 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY3 WIRE LEAD
UNDERCUT DIAMETER0.781 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM


Click here to Register for Free 30-day Trial