5905-00-022-5635, RESISTOR,VARIABLE,WIRE WOUND,NON

5935-00-022-5637 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
5905-00-022-5635

Federal Supply Class:
5905

National Item Identification Number:
000225635

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

3250P-FR7-503	80294	BOURNS INSTRUMENTS INC
3250PD96-503	80294	BOURNS INSTRUMENTS INC
C603000740	88818	KEARFOTT CORPORATION

Techincal Specification:

ELECTRICAL RESISTANCE PER SECTION	50.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION
BODY HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES
BODY WIDTH	0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
OVERALL HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OVERALL LENGTH	1.030 INCHES NOMINAL
OVERALL WIDTH	0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
MOUNTING METHOD	UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL
SECTION QUANTITY	1
SHAFT DIAMETER	0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
SHAFT LENGTH	0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-70.0 TO 70.0 SINGLE SECTION
TERMINAL LENGTH	0.500 INCHES MINIMUM
TERMINAL LOCATION	REAR END
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	88818-C603000740 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial