|
|
|
National Stock Number:
5905-00-022-5663
Federal Supply Class:
5905
National Item Identification Number:
000225663
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10-00269-007 | 00724 | RAYTHEON COMPANY | | 200370-037 | 81413 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 2605666-137 | 06424 | ALLIANT TECHSYSTEMS OPERATIONS LLC | | 352202042491 | H0673 | ALCATEL-LUCENT NETWORK SYSTEMS | | 418634-27 | 96214 | RAYTHEON COMPANY | | 443-004-055 | A1997 | ELETTRONICA SPA | | 443-004-055 | C3141 | ELETTRONICA GMBH | | 99067206 | F6481 | THALES SA | | MILR27208-9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RT24C2X102 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RT24C2X102FS | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | BODY LENGTH | 0.420 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR | | BODY WIDTH | 0.140 INCHES MINIMUM AND 0.240 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.419 INCHES NOMINAL | | OVERALL HEIGHT | 0.440 INCHES MINIMUM AND 0.470 INCHES MAXIMUM | | OVERALL LENGTH | 0.592 INCHES NOMINAL | | OVERALL WIDTH | 0.140 INCHES MINIMUM AND 0.240 INCHES MAXIMUM | | MOUNTING METHOD | TERMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | SHAFT LENGTH | 0.080 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-27208/9 GOVERNMENT SPECIFICATION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL LENGTH | 0.172 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|