5905-00-023-7356 RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECI Index 5985-00-023-7361 WAVEGUIDE ASSEMBLY

National Stock Number:
5905-00-023-7357

Federal Supply Class:
5905

National Item Identification Number:
000237357

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
376-0203-0013499ROCKWELL COLLINS, INC.
376-0203-0095104ALCATEL-LUCENT HOLDINGS INC.
376-0203-00013499ROCKWELL COLLINS, INC.
376-0203-00095104ALCATEL-LUCENT HOLDINGS INC.
JX350758756CTS CORP ELECTROMECHANICAL DIV
JX350771450CTS CORP


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION1.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
BODY DIAMETER0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
BODY LENGTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
DEVICE DESIGN TYPENONTURN AT 9 OCLOCK
OVERALL DIAMETER1.000 INCHES MAXIMUM
OVERALL LENGTH0.875 INCHES NOMINAL
MOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
MOUNTING METHODLOCKING BUSHING
NONTURN DEVICE RADIUS0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS0.2 HEAT SINK SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
SCREW THREAD DIAMETER0.250 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY1
SHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
SHAFT LENGTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TERMINAL LENGTH0.234 INCHES MAXIMUM
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial