5998-01-370-4802 CIRCUIT CARD ASSEMBLY Index 5905-01-370-4804 RESISTOR,FIXED,FILM

National Stock Number:
5905-01-370-4803

Federal Supply Class:
5905

National Item Identification Number:
013704803

Description:
RESISTOR,FIXED,FILM

Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.


Manufacturer Information:
5529218-2153711NAVAL SEA SYSTEMS COMMAND
MIL-PRF-55182/981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-55182/981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RNC90Y53K600BP81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RNC90Y53K600BR81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL RESISTANCE53.600 KILOHMS
AMBIENT TEMP AT FULL RATED POWER125.0 CELSIUS
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER175.0
BODY HEIGHT0.095 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
BODY LENGTH0.290 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
BODY WIDTH0.336 INCHES MAXIMUM
INCLOSURE TYPEENCAPSULATED
POWER DISSIPATION RATING IN WATTS0.300 FREE AIR
RESISTANCE TOLERANCE IN PERCENT-0.100 TO 0.100
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.100
RELIABILITY INDICATORESTABLISHED
SPECIFICATION/STANDARD DATA81349-MIL-R-55182/9 GOVERNMENT SPECIFICATION
STYLE DESIGNATORTERMINALS ONE EDGE
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-10.0 TO 10.0
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-5.0 TO 5.0
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS+125.0 TO 175.0
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 125.0
TERMINAL LENGTH0.875 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
TERMINAL TYPEWIRE LEAD
TEST DATA DOCUMENT81349-MIL-R-55182/9 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial