|
|
|
National Stock Number:
5905-01-372-0776
Federal Supply Class:
5905
National Item Identification Number:
013720776
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 47002157G01 | 58307 | GENERAL ATOMICS ELECTRONIC SYSTEMS, INC. DIV N/A | | L04475 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | S106K1M0000V | 18612 | VISHAY INTERTECHNOLOGY, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 1.000 MEGOHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.185 INCHES NOMINAL | | BODY LENGTH | 0.435 INCHES NOMINAL | | BODY WIDTH | 0.430 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | FEAT | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.005 TO 0.005 | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L04475; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY | | STYLE DESIGNATOR | TERMINALS ONE EDGE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -2.5 TO 2.5 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TERMINAL LENGTH | 1.000 INCHES NOMINAL | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 58307-47002157 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|