|
|
|
National Stock Number:
5905-01-375-6588
Federal Supply Class:
5905
National Item Identification Number:
013756588
Description:
RESISTOR,CHIP,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| CRCW1206-333J | 91637 | VISHAY DALE ELECTRONICS, LLC | | D55342K07B33K0R | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-55342/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-55342/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY LENGTH | 0.057 INCHES MINIMUM AND 0.073 INCHES MAXIMUM | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | STYLE DESIGNATOR | TERMINATION PAD EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | RELIABILITY INDICATOR | ESTABLISHED | | BODY WIDTH | 0.121 INCHES MINIMUM AND 0.131 INCHES MAXIMUM | | TEST DATA DOCUMENT | 81349-MIL-R-55342 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | INCLOSURE METHOD | UNINCLOSED | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | BODY HEIGHT | 0.039 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-55342/7 GOVERNMENT SPECIFICATION | | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR | | ELECTRICAL RESISTANCE | 33.000 KILOHMS | | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 |
|
|