|
|
|
National Stock Number:
5905-01-460-4938
Federal Supply Class:
5905
National Item Identification Number:
014604938
Description:
RESISTOR,CHIP,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| D55342K07B59D0R | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | D55342K07B59D0R | 8Z699 | MATSUSHITA ELECTRIC CORP OF AMERICA PANASONIC CO | | MIL-PRF-55342/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | ERJ8ENF59R0 | 8Z699 | MATSUSHITA ELECTRIC CORP OF AMERICA PANASONIC CO |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 59.000 OHMS | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM | | BODY LENGTH | 0.118 INCHES MINIMUM AND 0.134 INCHES MAXIMUM | | BODY WIDTH | 0.015 INCHES MINIMUM AND 0.033 INCHES MAXIMUM | | INCLOSURE METHOD | UNINCLOSED | | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 | | RELIABILITY INDICATOR | ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | TERMINATION PAD EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -300.0 TO 300.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | | TERMINAL LENGTH | 0.010 INCHES MINIMUM AND 0.025 INCHES MAXIMUM | | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE |
|
|