| BODY HEIGHT | 1.500 INCHES NOMINAL |
| BODY LENGTH | 6.000 INCHES NOMINAL |
| BODY STYLE | W/MTG HOLE(S)/SLOT(S) TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 2.120 INCHES NOMINAL |
| CAPACITANCE VALUE PER SECTION | 0.040 MICROFARADS ALL SECTIONS |
| CASE MATERIAL | PLASTIC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 5.500 INCHES NOMINAL |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.600 |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 5.250 INCHES NOMINAL |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 350.0 MEGOHM-MICROFARADS |
| INSULATION RESISTANCE AT REFERENCE TEMP | 8000.0 MEGOHM-MICROFARADS |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED MOUNTING HOLES |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 10000.0 DC ALL SECTIONS |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | SERIES CONNECTED |
| SECTION QUANTITY | 2 |
| TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | -3.0 TO 5.0 ALL SECTIONS |
| TERMINAL HEIGHT FROM BODY | 0.300 INCHES MAXIMUM |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 3 STANDOFF, SOLDER LUG |
| TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT ALL SECTIONS |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.187 INCHES MINIMUM |