|
|
|
National Stock Number:
5910-00-009-0961
Federal Supply Class:
5910
National Item Identification Number:
000090961
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| FM720-33-100K | 19396 | PAKTRON CAPACITORS LLC DBA PAKTRON CAPACITORS LLC DIV PANCON CORPORATION | | P12885 | 07639 | GE AVIATION SYSTEMS LLC | | P12885-8 | 07639 | GE AVIATION SYSTEMS LLC |
|
Techincal Specification:
| BODY HEIGHT | 0.350 INCHES MAXIMUM | | BODY LENGTH | 0.720 INCHES MAXIMUM | | BODY WIDTH | 0.520 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | CAPACITANCE VALUE PER SECTION | 0.330 MICROFARADS SINGLE SECTION | | CASE MATERIAL | PLASTIC | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.555 INCHES MINIMUM AND 0.655 INCHES MAXIMUM | | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHMS | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 1.400 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 07639-+12885 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|