|
|
|
National Stock Number:
5910-00-023-9803
Federal Supply Class:
5910
National Item Identification Number:
000239803
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 54330443-8 | 95750 | AIRCO REPUBLIC ELECTRONICS, INC. | | XC204C393-5 | 72928 | GULTON INDUSTRIES INC GUDEMAN DIV |
|
Techincal Specification:
| BODY DIAMETER | 0.405 INCHES MAXIMUM | | BODY LENGTH | 1.156 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 39000.000 PICOFARADS SINGLE SECTION | | DIELECTRIC MATERIAL | PLASTIC | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 250.0 MEGOHM-MICROFARADS | | INSULATION RESISTANCE AT REFERENCE TEMP | 75000.0 MEGOHM-MICROFARADS | | NONDERATED OPERATING TEMP | -65.0 CELSIUS MINIMUM AND 165.0 CELSIUS MAXIMUM | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.032 INCHES NOMINAL | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TEST DATA DOCUMENT | 95750-54330443 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|