|
|
|
National Stock Number:
5910-01-364-2817
Federal Supply Class:
5910
National Item Identification Number:
013642817
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 225451000 | 5Y717 | SCHLUMBERGER TECHNOLOGIES INC AUTOMATIC TEST EQUIPMENT | | MKS4-100UF-1090-100V | D9816 | WIMA SPEZIALVERTRIEB ELEKTRONISCHERBAUELEMENTE GMBH & CO.KG | | MKT1818-410-01-5 | 4U402 | ROEDERSTEIN ELECTRONICS INC |
|
Techincal Specification:
| BODY HEIGHT | 9.0 MILLIMETERS NOMINAL | | BODY LENGTH | 10.0 MILLIMETERS NOMINAL | | BODY STYLE | SINGLE INLINE | | BODY WIDTH | 4.0 MILLIMETERS NOMINAL | | CAPACITANCE VALUE PER SECTION | 0.1000 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 7.5 MILLIMETERS NOMINAL | | DIELECTRIC MATERIAL | PLASTIC POLYETHYLENE TEREPHTHALATE | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 15000.0 MEGOHMS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION AND 63.0 AC-RMS SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 100.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.70 MILLIMETERS NOMINAL | | TERMINAL LENGTH | 6.0 MILLIMETERS NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 PIN | | TEST DATA DOCUMENT | 5Y717-225451000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|