5910-01-370-7748 CAPACITOR,FIXED,ELECTROLYTIC Index 5910-01-370-7750 CAPACITOR,FIXED,METALLIZED,PAPER

National Stock Number:
5910-01-370-7749

Federal Supply Class:
5910

National Item Identification Number:
013707749

Description:
CAPACITOR,FIXED,ELECTROLYTIC

Detail:
A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.


Manufacturer Information:
M39018/07-0108M81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-39018/781349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-39018/781349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL POLARIZATIONPOLARIZED
BODY DIAMETER2.125 INCHES MINIMUM AND 2.343 INCHES MAXIMUM
BODY LENGTH2.125 INCHES MINIMUM AND 2.343 INCHES MAXIMUM
BODY STYLEW/O MTG FACILITIES, AXIAL TERMINALS
CAPACITIVE ELECTRODE MATERIALALUMINUM
CAPACITANCE VALUE PER SECTION300.000 MICROFARADS SINGLE SECTION
CASE INSULATION MATERIALPLASTIC
CASE MATERIALMETAL
DC LEAKAGE AT MAXIMUM OPERATING TEMP520.0 MICROAMPERES
DC LEAKAGE AT REFERENCE TEMP86.000 MICROAMPERES
EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS0.435
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION100.0 DC SINGLE SECTION
RELIABILITY FAILURE RATE LEVEL IN PERCENT1.000
RELIABILITY INDICATORESTABLISHED
SCHEMATIC DIAGRAM DESIGNATORTWO COMMON TERMINALS FOR EACH ELECTRODE
SPECIFICATION/STANDARD DATA81349-MIL-C-39018/7 GOVERNMENT SPECIFICATION
TERMINAL LENGTH2.500 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY4 UNINSULATED WIRE LEAD
TEST DATA DOCUMENT81349-MIL-C-39018 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TOLERANCE RANGE PER SECTION-10.00 TO 75.00 PERCENT SINGLE SECTION


Click here to Register for Free 30-day Trial