| REFERENCE FREQUENCY PER FUNCTION | 147.5 KILOHERTZ BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 3.5 BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| FREQUENCY BAND WIDTH PER FUNCTION | 147.20 KILOHERTZ BLANK AND |
| 147.80 KILOHERTZ BLANK |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT 1ST FUNCTION |
| 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
| 2 TAB, SOLDER LUG GROUND 3RD FUNCTION |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| SOURCE IMPEDANCE RATING PER FUNCTION | 1.0 KILOHMS BLANK |
| LOAD IMPEDANCE PER FUNCTION | 1.0 KILOHMS BLANK |
| OVERALL HEIGHT | 1.906 INCHES MAXIMUM |
| BODY LENGTH | 1.920 INCHES MAXIMUM |
| BODY HEIGHT | 1.500 INCHES MAXIMUM |
| BODY WIDTH | 1.010 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED STUD |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.959 INCHES MINIMUM AND |
| 0.991 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.440 INCHES MINIMUM AND |
| 0.560 INCHES MAXIMUM |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| TEST DATA DOCUMENT | 10001-2515586 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 143.00 KILOHERTZ BLANK AND |
| 147.20 KILOHERTZ BLANK AND |
| 147.80 KILOHERTZ BLANK AND |
| 152.00 KILOHERTZ BLANK |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 30.0 MINIMUM BLANK AND |
| 1.0 MAXIMUM BLANK 1ST FUNCTION |
| MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE | 100.0 VOLTS AT SEA LEVEL |
| OPERATING TEMP RANGE | 0.0 TO 75.0 DEG CELSIUS |