|
|
|
National Stock Number:
5915-01-361-5377
Federal Supply Class:
5915
National Item Identification Number:
013615377
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| M28861/02-005TB | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-28861/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-28861/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY LENGTH | 0.648 INCHES NOMINAL | | BODY OUTSIDE DIAMETER | 0.410 INCHES NOMINAL | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT 1ST FUNCTION1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION | | INCLOSURE TYPE | HERMETICALLY SEALED | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | OVERALL LENGTH | 1.125 INCHES NOMINAL | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 1.0 BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 100.0 VOLTS DC BLANK | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | SPECIFICATION/STANDARD DATA | 81349-MIL-F-28861/2 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES | | TEST DATA DOCUMENT | 81349-MIL-F-28861 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|