5925-01-354-6084, CIRCUIT BREAKER

National Stock Number:
5925-01-354-6084

Federal Supply Class:
5925

National Item Identification Number:
013546084

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

865528-4	06481	NORTHROP GRUMMAN SYSTEMS CORPORATION
865528-4	13973	LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
AP12-24241-4	81541	SENSATA TECHNOLOGIES MARYLAND, INC

Techincal Specification:

POLE QUANTITY	2
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	10.0 AMPERES DC FIRST LOCATION
	100.0 MILLIAMPERES DC SECOND LOCATION
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
TERMINAL TYPE AND QUANTITY	4 WIRE HOOK
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	28.0 DC ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY FIRST LOCATION
	INSTANTANEOUS SECOND LOCATION
RESET METHOD	MANUAL
BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE
MOUNTING FACILITY TYPE AND QUANTITY	2 THREADED HOLE AND
	1 THREADED BUSHING W/PANEL SEAL
UNPACKAGED UNIT WEIGHT	4.000 OUNCES NOMINAL
TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	500.0 DC ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.055 MINIMUM AT 200 PCT AND
	0.950 MAXIMUM AT 200 PCT FIRST LOCATION
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
BUSHING LENGTH	0.332 INCHES MINIMUM AND
	0.380 INCHES MAXIMUM
BODY LENGTH	1.562 INCHES MAXIMUM
BODY WIDTH	1.281 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.906 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.625 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.628 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNC AND
	UNEF
NOMINAL THREAD SIZE	0.138 INCHES AND
	0.375 INCHES
THREAD QUANTITY PER INCH	32
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	BETWEEN POLE ONE AND TWO
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND
	HERMETICALLY SEALED AND
	VIBRATION RESISTANT AND
	SHOCK RESISTANT AND
	DUSTPROOF AND
	CORROSION RESISTANT
FEATURES PROVIDED	HIGH INRUSH PROTECTION
TEST DATA DOCUMENT	13973-865528 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
SPECIAL HANDLING FEATURE	MAGNETIC
FRAGILITY FACTOR	MODERATELY RUGGED

Click here to Register for Free 30-day Trial