5925-01-366-6001, CIRCUIT BREAKER

National Stock Number:
5925-01-366-6001

Federal Supply Class:
5925

National Item Identification Number:
013666001

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

90001A2107	01365	MARINE CORPS LOGISTICS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE-MICC LOGISTICS OPERATIONS CENTER
APGN26-24226-2	81541	SENSATA TECHNOLOGIES MARYLAND, INC

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE TWO
BODY LENGTH	2.000 INCHES NOMINAL
BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE
BODY WIDTH	1.530 INCHES NOMINAL
BUSHING LENGTH	0.625 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.530 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.750 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	30.0 AMPERES DC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	2000.0 DC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING W/PANEL SEAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.232 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.500 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	65.0 DC ALL LOCATIONS
POLE QUANTITY	2
RESET METHOD	MANUAL
TERMINAL TYPE AND QUANTITY	4 TAB W/SCREW
THREAD SERIES DESIGNATOR	UN
THREAD QUANTITY PER INCH	32
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	1.000 MINIMUM AT 200 PCT AND 10.000 MAXIMUM AT 200 PCT ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 ALL LOCATIONS

Click here to Register for Free 30-day Trial