5925-01-370-1818, CIRCUIT BREAKER

National Stock Number:
5925-01-370-1818

Federal Supply Class:
5925

National Item Identification Number:
013701818

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

JA3S-A8A3A8-DA-01-DA	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV
JA3S-Z160-1	1W134	EATON CORP AEROSPACE COMMERCIAL CONTROLS DIV

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT EACH POLE
BODY LENGTH	2.000 INCHES NOMINAL
BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE
BODY WIDTH	2.250 INCHES NOMINAL
BOSS HEIGHT	0.130 INCHES NOMINAL
CASE MATERIAL	PLASTIC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.560 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.750 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	1.660 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.750 INCHES NOMINAL
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE, TWO, AND THREE LINKED
FREQUENCY IN HERTZ	50.0 OR 60.0 ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC ALL LOCATIONS
MANUAL ACTUATOR TYPE AND QUANTITY	3 TOGGLE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	100.0 MILLIAMPERES AC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	6 THREADED HOLE
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.930 INCHES NOMINAL
NOMINAL THREAD SIZE	0.138 INCHES
POLE QUANTITY	3
RESET METHOD	MANUAL
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 ALL LOCATIONS
TERMINAL TYPE AND QUANTITY	6 TAB, SOLDER LUG
THREAD SERIES DESIGNATOR	UNC
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.200 MINIMUM AT 200 PCT AND 2.000 MAXIMUM AT 200 PCT ALL LOCATIONS

Click here to Register for Free 30-day Trial