| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AND 0.5 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 2ND SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 3RD SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 4TH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| DETENT ROTATIONAL TORQUE RANGE | +2.000 TO 4.000 INCH-POUNDS SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM SINGLE ACTUATOR |
| FLAT HEIGHT | 0.214 INCHES NOMINAL SINGLE ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 4 |
| OVERALL DIAMETER | 1.250 INCHES MAXIMUM |
| OVERALL LENGTH | 3.014 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 O'CLOCK |
| POLE QUANTITY | 1 2ND SECTION FRONT |
| POLE QUANTITY | 1 3RD SECTION FRONT |
| POLE QUANTITY | 1 4TH SECTION FRONT |
| ROTOR THROUGH CONNECTION QUANTITY | 1 2ND SECTION |
| ROTOR THROUGH CONNECTION QUANTITY | 1 3RD SECTION |
| ROTOR THROUGH CONNECTION QUANTITY | 1 4TH SECTION |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 195.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| SHAFT LENGTH | 0.834 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 5 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 45.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 5 2ND SECTION REAR |
| THROW QUANTITY | 5 3RD SECTION REAR |
| THROW QUANTITY | 5 4TH SECTION REAR |