CONTACT LOAD CURRENT RATING | 50.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE |
CONTACT LOAD CURRENT RATING | 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
CONTACT LOAD CURRENT RATING | 125.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
CONTACT LOAD CURRENT RATING | 20.0 MILLIAMPERES RESISTIVE LOAD AC AT ALTITUDE |
CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT ALTITUDE |
CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT ALTITUDE |
CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
DETENT ROTATIONAL TORQUE RANGE | +0.400 TO 2.700 INCH-POUNDS SINGLE ACTUATOR |
FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
FLAT HEIGHT | 0.094 INCHES NOMINAL SINGLE ACTUATOR |
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
INDIVIDUAL SECTION QUANTITY | 2 |
OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
OVERALL DIAMETER | 0.781 INCHES NOMINAL |
OVERALL LENGTH | 1.915 INCHES NOMINAL |
MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
NONTURN DEVICE RADIUS | 0.260 INCHES NOMINAL AT 3:00 O'CLOCK |
NONTURN DEVICE TYPE | TAB AT 3:00 O'CLOCK |
POLE QUANTITY | 1 2ND SECTION FRONT |
POLE QUANTITY | 3 1ST SECTION FRONT |
PRECIOUS MATERIAL | GOLD AND SILVER |
PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD AND CONTACT SURFACES SILVER |
ROTOR THROUGH CONNECTION QUANTITY | 1 2ND SECTION |
ROTOR THROUGH CONNECTION QUANTITY | 3 1ST SECTION |
SHAFT DIAMETER | 0.125 INCHES NOMINAL SINGLE ACTUATOR |
SHAFT LENGTH | 0.375 INCHES NOMINAL SINGLE ACTUATOR |
SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
SWITCH ACTUATOR MOMENTARY POSITION | COUNTERCLOCKWISE SINGLE ACTUATOR |
SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
TERMINAL TYPE | TAB, SOLDER LUG |
THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
THREAD LENGTH | 0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY |
THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
THROW QUANTITY | 4 EACH SECTION REAR |