|
|
|
National Stock Number:
5930-00-020-7934
Federal Supply Class:
5930
National Item Identification Number:
000207934
Description:
BOOT,DUST AND MOISTURE SEAL
Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 115389 | 16848 | LOCKHEED MARTIN SIPPICAN, INC. | | 19003-17 | 04009 | COOPER INDUSTRIES INC COOPER DISTRIBUTION EQUIPMENT DIV | | 352250014032 | H0203 | THALES NEDERLAND B.V. | | 404-9116-001 | 97896 | HONEYWELL INTERNATIONAL INC. | | 5930PL1627835 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | JL80725 | K0119 | BRITISH AEROSPACE SYSTEMS & EQUIPMENT | | M5423/11-01 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-5423/11 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILB5423-11 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N5032B | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | PL1976054 IT.58 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BASE THREAD LOCATION | INTERNAL | | BASE HEIGHT | 0.088 INCHES NOMINAL | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF-NEMA TYPE 13 AND WATERTIGHT-NEMA TYPE 4 | | OVERALL HEIGHT | 0.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-5847,TYPE A,CLASS 3 MIL SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL | RUBBER SILICONE BODY | | MOUNTING DEVICE QUANTITY | 1 | | MOUNTING METHOD | INTEGRAL THREADED NUT | | NOMINAL THREAD SIZE | 0.250 INCHES | | OPENING INSIDE DIAMETER | 0.188 INCHES NOMINAL | | SEALING METHOD | COMPRESSION | | SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-5423/11 GOVERNMENT SPECIFICATION | | WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL | | STYLE DESIGNATOR | THRU-HOLE | | TEST DATA DOCUMENT | 81349-MIL-DTL-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD LENGTH | 0.062 INCHES NOMINAL | | THREAD SERIES | UNS | | THREAD QUANTITY PER INCH | 40 |
|
|