| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| 28.0 DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 SINGLE ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| OVERALL LENGTH | 2.398 INCHES MINIMUM AND |
| 2.438 INCHES MAXIMUM |
| OVERALL DIAMETER | 1.248 INCHES MINIMUM AND |
| 1.250 INCHES MAXIMUM |
| INDIVIDUAL SECTION QUANTITY | 3 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| POLE QUANTITY | 1 1ST SECTION REAR |
| 1 2ND SECTION REAR |
| 2 3RD SECTION REAR |
| THROW QUANTITY | 10 1ST SECTION REAR |
| 10 2ND SECTION REAR |
| 4 3RD SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.290 INCHES MINIMUM AND |
| 0.330 INCHES MAXIMUM SINGLE ACTUATOR |
| FLAT HEIGHT | 0.213 INCHES MINIMUM AND |
| 0.223 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.248 INCHES MINIMUM AND |
| 0.250 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 0.730 INCHES MINIMUM AND |
| 0.770 INCHES MAXIMUM SINGLE ACTUATOR |
| NONTURN DEVICE TYPE | TAB AT 3:00 O'CLOCK |
| NONTURN DEVICE RADIUS | 0.510 INCHES MINIMUM AND |
| 0.550 INCHES MAXIMUM AT 3:00 O'CLOCK |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.360 INCHES MINIMUM AND |
| 0.400 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| TEST DATA DOCUMENT | 80063-SMC423132 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 225.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| OPERATING TEMP RANGE | -25.0 TO 85.0 DEG CELSIUS |
| SPECIAL FEATURES | SECT. 1 REAR HAS 1 DUMMY TERMINAL,SECT. 2 REAR HAS 1 DUMMY TERMINAL,SECT. 3 REAR HAS 2 DUMMY TERMINALS |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 80063 |
| DESIGN CONTROL REFERENCE | SMC423132 |