|
|
|
National Stock Number:
5935-00-007-7376
Federal Supply Class:
5935
National Item Identification Number:
000077376
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 247AS-C1202-004 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 900999-8934 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GR100MISLWWP3 | 81312 | WINCHESTER INTERCONNECT CORPORATION | | GR100MISLWWP3 | 97954 | U S COMPONENTS INC | | GR100MW1SLP3 | 81312 | WINCHESTER INTERCONNECT CORPORATION |
|
Techincal Specification:
| CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-750,COMP,B HARD FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 3.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.775 INCHES MINIMUM AND 2.789 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | SALT WATER RESISTANT AND VIBRATION RESISTANT | | INCLUDED CONTACT QUANTITY | 100 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TY SDG-F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | OVERALL HEIGHT | 0.840 INCHES NOMINAL | | OVERALL LENGTH | 3.050 INCHES MAXIMUM | | OVERALL WIDTH | 0.500 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD LENGTH | 0.350 INCHES | | NOMINAL THREAD SIZE | 0.112 INCHES | | POLARIZATION METHOD | JACKSCREW | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.100 GOLD GRAINS, TROY | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | WIRE WRAP SINGLE MATING END SINGLE CONTACT GROUPING | | THREAD CLASS | 2A AND 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 40 | | THREADED DEVICE TYPE | COUPLING FACILITY AND MOUNTING STUD | | THREAD SERIES DESIGNATOR | UNC |
|
|