5998-00-009-1185 PLASTIC SHEET,LAMINATED,COPPER CLAD Index 5935-00-009-1189 JACK,TIP

National Stock Number:
5935-00-009-1188

Federal Supply Class:
5935

National Item Identification Number:
000091188

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
0131004734511FLUKE BIOMEDICAL CORPORATION
1-331693-200779TE CONNECTIVITY CORPORATION
31-31800779TE CONNECTIVITY CORPORATION
31-31813511AMPHENOL CADRE DIV BUNKER RAMO CORP
401856-112909CARDION INC
401856-120284AIMTRON SYSTEMS, LLC
73-815109-307397GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS
8818300010-157057NAVCOM DEFENSE ELECTRONICS, INC.
KC-19-27891836WINCHESTER INTERCONNECT CORPORATION
KC19-6091836WINCHESTER INTERCONNECT CORPORATION


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.796 INCHES MINIMUM AND 0.843 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
BUSHING ACCOMMODATION HOLE SHAPEROUND W/FLAT
CONNECTOR CABLE STRAIN RELIEF METHODCOMPRESSION NUT
CONNECTOR LOCKING METHODBAYONET PIN
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-530,COMP A FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLEBNC SINGLE MATING END
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONMOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIALPLASTIC TETRAFLUOROETHYLENE SINGLE MATING END
OVERALL DIAMETER0.500 INCHES MINIMUM
OVERALL LENGTH1.625 INCHES MAXIMUM
MATING END QUANTITY1
MOUNTING FACILITY THICKNESS0.045 INCHES MINIMUM AND 0.240 INCHES MAXIMUM
NOMINAL THREAD SIZE0.500 INCHES
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD AND SHELL SURFACES SILVER
PRECIOUS MATERIALGOLD AND SILVER
PRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS, TROY AND 0.100 SILVER GRAINS, TROY
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIALCOPPER ALLOY
SHELL SURFACE TREATMENTSILVER
SHELL TYPESOLID
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREADED DEVICE TYPEMOUNTING BUSHING
THREAD SERIES DESIGNATORUNEF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us