|
|
|
National Stock Number:
5935-00-024-0616
Federal Supply Class:
5935
National Item Identification Number:
000240616
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M28748/10D0W01A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M28748/10D0WO1A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748/10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC28748-10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS18162-2W | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, RECTANGULAR | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.545 INCHES MINIMUM AND 0.555 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | SCREW | | CONTACT POSITION ARRANGEMENT STYLE | 52 SINGLE MATING END | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.895 INCHES MINIMUM AND 1.905 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,SGD-FSMIL-P-198833,GDI-30 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | OVERALL HEIGHT | 1.080 INCHES MINIMUM AND 1.100 INCHES MAXIMUM | | OVERALL LENGTH | 1.733 INCHES NOMINAL | | OVERALL WIDTH | 2.265 INCHES MINIMUM AND 2.285 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.250 INCHES | | POLARIZATION METHOD | POLARIZATION BOSS | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.052 GOLD GRAINS, TROY | | PRECIOUS MATERIAL | GOLD | | SPECIAL FEATURES | POLARIZED W POSITION | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-28748/10 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 28 | | THREADED DEVICE TYPE | COUPLING FACILITY | | UNTHREADED MOUNTING HOLE DIAMETER | 0.149 INCHES NOMINAL |
|
|