|
|
|
National Stock Number:
5935-00-057-0089
Federal Supply Class:
5935
National Item Identification Number:
000570089
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 882C396P32 | 99971 | LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS | | SM1-20M2CSLDM40 | 81312 | WINCHESTER INTERCONNECT CORPORATION | | SMI20M2CSLDM40 | 81312 | WINCHESTER INTERCONNECT CORPORATION | | SMI20MSL2MBC | 81312 | WINCHESTER INTERCONNECT CORPORATION | | SM1-20M2CSLDM40 | 97954 | U S COMPONENTS INC | | SMI20M2CSLDM40 | 97954 | U S COMPONENTS INC |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE | | CONTACT POSITION ARRANGEMENT STYLE | 20 20-20 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 20 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.297 INCHES MINIMUM AND | | 1.329 INCHES MAXIMUM | | OVERALL HEIGHT | 0.515 INCHES MINIMUM AND | | 0.547 INCHES MAXIMUM | | OVERALL WIDTH | 0.375 INCHES MINIMUM AND | | 0.407 INCHES MAXIMUM | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.984 INCHES MINIMUM AND | | 1.016 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.056 INCHES AND | | 0.099 INCHES | | THREAD CLASS | 2A AND | | 2B | | THREAD DIRECTION | RIGHT-HAND | | POLARIZATION METHOD | JACKSCREW | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD AND | | SILVER SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MIL-C-8384 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PRECIOUS MATERIAL | GOLD AND | | SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.020 GOLD GRAINS, TROY AND | | 0.020 SILVER GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND | | CONTACT SURFACES SILVER | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-8384 GOVERNMENT SPECIFICATION |
|
|