| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 4.728 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | FRICTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 4.550 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND VIBRATION RESISTANT |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG-F MIL SPEC 1ST MATERIAL RESPONSE OR MIL-M-24519 MIL SPEC 2ND MATERIAL RESPONSE ALL MATING ENDS |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE GLASS FILLED OR PLASTIC POLYESTER GLASS FILLED ALL MATING ENDS |
| OVERALL HEIGHT | 5.150 INCHES MINIMUM AND 5.170 INCHES MAXIMUM |
| OVERALL LENGTH | 1.775 INCHES NOMINAL |
| OVERALL WIDTH | 4.980 INCHES MINIMUM AND 5.010 INCHES MAXIMUM |
| MATING END QUANTITY | 6 |
| POLARIZATION METHOD | GUIDE PIN/SOCKET AND 3 POLARIZATION POSTS |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II FED SPEC ALL TREATMENT RESPONSES |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| SHELL TYPE | SOLID |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.146 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |