| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.442 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| BUSHING ACCOMMODATION HOLE SHAPE | ROUND |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT POSITION ARRANGEMENT STYLE | 12-35 SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.812 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND CORROSION RESISTANT AND DUST RESISTANT AND FUEL RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND OIL RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 22 SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC EPOXY SINGLE MATING END |
| INSERT POSITION IN DEG | 32.0 AND 95.0 AND 132.0 AND 232.0 AND 260.0 |
| OVERALL HEIGHT | 1.047 INCHES NOMINAL |
| OVERALL LENGTH | 0.697 INCHES MAXIMUM |
| OVERALL WIDTH | 1.047 INCHES NOMINAL |
| MATING END QUANTITY | 1 |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.022 GOLD GRAINS, TROY |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TY 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416, TY 2 FED SPEC 2ND TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE AND NICKEL |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 96906-MS27508 GOVERNMENT STANDARD |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |