| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.878 INCHES MINIMUM AND 0.898 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
| CABLE ENTRANCE DIAMETER | 0.812 INCHES MINIMUM AND 1.188 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.281 INCHES NOMINAL |
| CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED COUPLING RING |
| CONTACT POSITION ARRANGEMENT STYLE | 23-64 SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.281 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND CORROSION RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT AND HEAT RESISTANT AND COLD RESISTANT |
| INCLUDED CONTACT QUANTITY | 64 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC FLUOROSILICONE SINGLE MATING END |
| INSERT POSITION IN DEG | 0.0 AND 67.0 AND 164.0 AND 218.0 AND 270.0 |
| OVERALL HEIGHT | 1.508 INCHES NOMINAL |
| OVERALL LENGTH | 7.938 INCHES MAXIMUM |
| OVERALL WIDTH | 1.508 INCHES NOMINAL |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 1.500 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.064 GOLD GRAINS, TROY |
| SHELL MATERIAL | ALUMINUM |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE AND NICKEL |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-28840/20 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-28840 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A |
| THREAD SERIES DESIGNATOR | DOUBLE STUB |
| THREAD QUANTITY PER INCH | 10 |
| THREADED DEVICE TYPE | COUPLING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES NOMINAL |