5935-01-369-7535 CONNECTOR,PLUG,ELECTRICAL Index 5935-01-369-7537 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-369-7536

Federal Supply Class:
5935

National Item Identification Number:
013697536

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
M81511/21FJ01P10U583SAE INTERNATIONAL
M81511/21FJ01P181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-81511/2181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SAE-AS81511/210U583SAE INTERNATIONAL


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.894 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE24-155 SINGLE MATING END
CONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM
INCLUDED CONTACT QUANTITY155 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIALPLASTIC ACRYLIC SINGLE MATING END
INSERT POSITION IN DEG0.0
OVERALL HEIGHT1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM
OVERALL LENGTH1.486 INCHES MINIMUM AND 1.551 INCHES MAXIMUM
OVERALL WIDTH1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM
MATING END QUANTITY1
NOMINAL THREAD SIZE1.500 INCHES
POLARIZATION METHODKEY, MULTIPLE KEY GROOVE
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.155 GOLD GRAINS, TROY
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENTNICKEL
SHELL TYPESOLID
UNTHREADED MOUNTING HOLE DIAMETER0.116 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA81349-MIL-C-81511/21 GOVERNMENT SPECIFICATION
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUN
THREAD QUANTITY PER INCH28
THREADED DEVICE TYPEBACK SHELL


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us