|
|
|
National Stock Number:
5935-01-369-8331
Federal Supply Class:
5935
National Item Identification Number:
013698331
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| MIL-C-5015 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3450KS28-12P | 0U583 | SAE INTERNATIONAL | | SAE-AS50151 | 0U583 | SAE INTERNATIONAL | | MS3450KS28-12P | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CONTACT POSITION ARRANGEMENT STYLE | 28-12 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 26 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 2.500 INCHES NOMINAL | | OVERALL HEIGHT | 2.000 INCHES NOMINAL | | OVERALL WIDTH | 2.000 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.562 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.562 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.812 INCHES NOMINAL | | UNTHREADED MOUNTING HOLE DIAMETER | 0.177 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | THREADED DEVICE TYPE | BACK SHELL AND | | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 0.750 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | SHELL TYPE | SOLID | | SHELL MATERIAL | STEEL CORROSION RESISTING | | SHELL SURFACE TREATMENT | CADMIUM AND | | CHROMATE | | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | | INSERT POSITION IN DEG | 0.0 | | INSERT MATERIAL | RUBBER SILICONE CLASS Q SINGLE MATING END | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND | | SALT WATER RESISTANT AND | | VIBRATION PROOF AND | | SHOCK RESISTANT AND | | COLD RESISTANT AND | | HEAT RESISTANT AND | | EXPLOSION PROOF | | TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | OPERATING TEMP RATING | -55.0 DEG CELSIUS MINIMUM AND | | 200.0 DEG CELSIUS MAXIMUM | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.026 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | SUPPLEMENTARY FEATURES | MOUNTING METHOD - UNTHREADED HOLE | | NONDEFINITIVE SPEC/STD DATA | 96906-MS3450KS28-12P SPECIFICATION SHEET |
|
|