5935-01-370-1174 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5935-01-370-1176 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-370-1175

Federal Supply Class:
5935

National Item Identification Number:
013701175

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
M39012/82-320881349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-39012/8281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-39012/8281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY STYLESTRAIGHT SHAPE W/CABLE CLAMP
CONTACT POSITION ARRANGEMENT STYLESMA SINGLE MATING END
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY1
OVERALL LENGTH0.750 INCHES MAXIMUM
BUSHING DIAMETER0.300 INCHES MAXIMUM
OVERALL HEIGHT0.510 INCHES MAXIMUM
OVERALL WIDTH0.510 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.342 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.342 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.340 INCHES MAXIMUM
UNTHREADED MOUNTING HOLE DIAMETER0.099 INCHES MINIMUM AND
0.106 INCHES MAXIMUM
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
THREADED DEVICE TYPECOUPLING FACILITY
THREAD SERIES DESIGNATORUNS
NOMINAL THREAD SIZE0.250 INCHES
THREAD CLASS2A
THREAD QUANTITY PER INCH36
THREAD DIRECTIONRIGHT-HAND
CONNECTOR CABLE STRAIN RELIEF METHODCOMPRESSION NUT
CABLE ENTRANCE DIAMETER0.141 INCHES NOMINAL
SHELL TYPESOLID
SHELL MATERIALCOPPER ALLOY
SHELL SURFACE TREATMENTGOLD AND
COPPER
INSERT MATERIALPLASTIC FLUORINATED ETHYLENE PROPYLENE OR
PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT81349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.0105 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT AND SHELL SURFACES GOLD
SPECIFICATION/STANDARD DATA81349-MIL-C-39012 GOVERNMENT SPECIFICATION
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-PRF-39012/82
DEFINITIVE GOVERNMENT SPEC/STD REFERENCEM39012/82-3208


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us